9
3.4 Electrical connection
1) Cable the 16 Amps Gewiss plug to a mains cable 3x2,5mm
2
.
2) Connect the lantern to a mains supply of 230V - 50/60Hz.
3) Ensure that the mains cable is connected to earth; the thermoswitch must have the following
electrical characteristics:
lamp 1200 HMI = rated for (In) 20A - sensitivity (Id) 0,3A
lamp 2500 HMI = rated for (In) 25A - sensitivity (Id) 0,3A
4.0 USE OF THE PROJECTOR
4.1 Switching on the unit
Connect the unit to power supply (make sure that needed operating voltage is respected) and turn
the main switch, located on the base, on. The unit can work according to 3 basic modes: manual
mode, manual by DMX mode, DMX mode.
4.2 Control panel
1
2
3
A001 = DMX ADDRESS CHANGE
B000 = BLACK-OUT
R000 = MIRROR DISH ROTATION
P000 = PAN MOVEMENT
S000 = PAN MOVEMENT SPEED
MAN = MANUAL MASTER
FLASHING GREEN LED = NO DMX SIGNAL
GREEN LED FIXED = DMX SIGNAL
MENU
UP
DOWN ENTER
DMX IN
DMX OUT
3
12
1 GND
2 DATA -
3 DATA +
Control Panel
