6.1 User Interface
The user interface consists of a selector for user input and an LED Indicator for operational status indication.
6.1.1 Function switch
The functionality provided by the “Function Switch” input and its timing parameters are
described in the following table.
6.2 LED Indicator
“Off” denotes a dark LED
“On” denotes a lit LED
Continuously Off = not assigned to a trasmitter
ON 900ms / Off 100ms = assigned to a trasmitter, but no DMX present
Continuously On = assigned to a trasmitter and DMX present
On 100ms / Off 100ms = link to transmitter lost or linking to transmitter
To ensure maximum functionality and light output it is recommended to follow these instructions:
7.1 Regular checks
• Check electrical connections, especially the ground wiring and the power supply cable.
• Check that the unit is not damaged mechanically. Replace those components which have got deteriorated.
6.0 Use of the unit
Receiver Function
Push
Idle / Normal Operation
No
Unlink from a Trasmitter
> 3 sec
7.0 Maintenance
Attention!
Always remove mains power prior to opening up the fixture.
18
English
