4.3 Powering up the unit
The unit can operate with standard 350mA led driver.
microCLIP MK2
is fitted with heat shrink tube which allow to perform
IP67
connections.
To make the connection follow these instructions.
1.
Open the bag enclosed yo this manual.
You will find inside two pieces of heat shrink tube.
2.
Insert the tube
“C”
onto the cable
“D”
.
3.
Solder the wires and isolate it through the heat shrink tube
“E”
by using a heater for heat shrink tubes
“F”
.
E
F
C
D
WHITE
BROWN
GREEN
BLUE
PINK
YELLOW
GRAY
N.C.
RED+
GREEN+
BLUE+
RED-
GREEN-
BLUE-
In order to avoid permanent damage to the unit,
the connection scheme must be strictly respected!!
English
13
