Griven AL1500, Instruction Manual

Page: 19 / 24

English 19
5.3 DMX functions
5.3.1 DMX functions with 6 Ch = OFF
5.3.2 DMX functions with 6 Ch = ON
Parade can operate without DMX signal (in AUTOMATIC mode) and can be set so that a single MASTER unit will
command a series of SLAVE units. This function is particularly useful when more units are desired to execute the
same programme in synchrony.
The following picture shows an example of a Master-Slave layout.
Channel Function Value Description
1 Red 0-255 Proportional control 0-100% of the Red color
2 Green 0-255 Proportional control 0-100% of the Green color
3 Blue 0-255 Proportional control 0-100% of the Blue color
4
Dimmer
Strobe
0-15 Luminous output intensity 100%
16-160 Proportional control of the luminous output intensity 0-100%
161-255 Proportional control of the strobe effect 0-100%
Channel Function Value Description
1 Red 0-255 Proportional control 0-100% of the Red color
2 Green 0-255 Proportional control 0-100% of the Green color
3 Blue 0-255 Proportional control 0-100% of the Blue color
4 Strobe
0-3 No strobe
4-63 Proportional control 0-100% of the strobe effect
64-66 No strobe
67-126
Proportional control 0-100% of the strobe effect with slow opening
and fast closing
127-129 No strobe
130-189
Proportional control 0-100% of the strobe effect with fast opening and
slow closing
190-192 No strobe
193-252
Proportional control 0-100% of the strobe effect with slow opening
and slow closing
253-255 No strobe
5 Dimmer 0-255 Proportional control of the luminous output intensity 0-100%
6
Preset
colours
0-255 62 preset c white
6.0 Master-Slave and Automatic function