18
English
6.2 Safety chain
If hooking
Parade i-Pix
up to a truss or a supporting structure, a safety chain must be installed. This safety chain
must be able to bear at least 10 times the weight of the unit, as prescribed by in force rules.
Hook the safety chain
“5”
as shown in the picture.
6.3 Connection to mains power
The unit can operate with voltage from 90 to 240Vac and with frequency of 50 and 60Hz.
It is not necessary to effect any setup procedures. The fixture will automatically adjust its operation to suit any fre-
quency or voltage within this range.
The unit is fitted with plug
“6”
and socket
“7”
for the connection
of the of the power supply, as shown in the pictures.
To connect the power supply, EXCLUSIVELY the IP65 connectors
enclosed to this manual are to be used, in order to preserve the
IP65 weather protection rate.
It is possible to connect the units in series, by using the connec-
tors fixed onto the units, as shown in the following picture.
Warning!
Do not connect in series more than 14 Parade i-Pix units (1 DMX universe).
IN
OUT
6
7
IN
OUT
Warning!
• Before connecting the unit, verify that power supplies features are compatible with the unit features.
• The unit must never be installed if not grounded electrically.
• It is suggested to use a magnetothermic switch along the power supply line, as prescribed by in force rules.
• The unit must not be powered up through a dimmer power device.
• Wiring and connection actions are to be performed by a qualified staff.
5
