6.0 RESET mode access from a DMX controller
Reset mode can be selected from any standard DMX controller by choosing the second channel of
the unit (Colour Wheel) and positioning between values 4 and 10 for more than 6 seconds.
7.0 MAINTENANCE
All lanterns require regular maintenance to ensure maximum performance and light output.
Please follow these instructions:
- clean lenses, mirrors and dichroics regularly, as even a thin layer of dust can reduce the light out-
put and scatter the beam;
- replace the lamp if it is damaged or deformed;
- carefully check the electrical connections, particularly the earth connection;
- replace lenses, mirrors and dichroic filters if they are visibly damaged;
- replace all damaged components
IMPORTANT: clean regularly the fans and the grids. Don't use screw drivers or sharp objects
which may damage the fans or other parts of the lantern.
8.0 TECHNICAL INFORMATION
9.0 SPARE PARTS
All components for the ACROBAT FE unit are available.
The exploded diagram and the catalogue are available on request.
ACROBAT FE MSD 250 W
Size
L424 x W400 x H540
mm
Weight
21,5
Kg
Body
Galvanised Steel Body Aluminium and Polypropylene
Operating Voltage
230
V
Operating Frequence
50/60
Hz
Operating Amperage
1,4
A
Power Absorbed
340
VA
Suggested Lamp
MSD 250 W
GY 9,5 Base
Optic Sistem
Focusing Fresnel Ø150
Coated elliptical reflector
23°-27° beam angle
Electtronic System Fuse
5x20 250V 5A
Max Working Temperature
90
°C
Max Ambient Temperature
50
°C
14
