Hole 'A'
Holes 'B'
A
B
Face A (both sides)
Step 1
. Place 'Hitch Mount' into receiver of your vehicle,
Select suitable hole position for your vehicle,
Fit
your
hitch pin and tighten anti-rattle bolt if applicable.
Step 2.
Fit 'Main Arm' onto 'Hitch Mount'
Align hole 'A' of hitch mount with hole 'A' of 'Main Arm' and insert 12mm x
•
110mm bolt.
Select & align one of the three holes 'B' in the 'Hitch Mount' with hole 'B' in
•
'Main Arm' (this will govern the height at which your bikes are carried)
Insert 12 mm x 110mm bolt.
•
Fit nuts and
tighten both firmly
.
•
Step 3.
Fit 'Hinge'
Apply a small amount of oil or grease to faces A
•
Fit Hinge in to Main Arm as shown.
•
Fit Pin Washer to Threaded Hinge Pin.
•
Insert Threaded hinge pin, ensuring that Pin Washer locates in hole as shown,
•
tighten firmly & fit R clip.
Insert Safety Pin & fit R clip.
•
page 2
Assembly
