Model 7300 Power Pinner CD Hand Welder
10
TESTING WELD SETTINGS
TESTING WELD SETTINGS
When you have performed all of the presets as discussed in the manual, it is recommended that
you perform several test welds with the same diameter weld pin and base material that you will
be using. This will verify that all of the settings are correct to the results you desire. Welding is
done by placing the weld pin on the magnetic tip, and pressing the gun to the work piece, com-
pressing the spring
Holding the gun perpendicular to the work piece, and aligning the weld pin to the desired posi-
tion on the work piece, press down (spring compressed), and depress the trigger
