GRIP Base Connector SHW
Assembly and Operating Manual
7 Maintenance and care
7.1 Disassembly of the SHW
(Behold Image 5)
1.
Disassemble the Base Connector SHW.
2.
Loosen the cylinder bolts for the holder (pos. 4).
3.
4.
5.
Clean all parts thoroughly. Inspect for wear and defects.
6.
Lubricate all fitting surfaces.
For assembly, reverse the order.
7.2 Torque specifications
M6 – 8,5 Nm; M8 – 20,6 Nm; M10 – 41 Nm; M12 – 71 Nm
8 Parts list
8.1 Spare and wear parts, depending on size
Rev. 1.01
5
The Base Connector SHW is virtually maintenance-free. Check the semi-cylindrical bolt in
regular intervals for correct function. Keep the mating surface and the moving parts clean and
lubricate them slightly.
Spare parts and component parts of the Base Connector SHW can be found on our
homepage: www.grip-gmbh.com
To disassemble crossway bolt (pos. 2) from the other components (pos. 3, 5 and 6),
remove cylinder pins (pos. 9 and 10).
Index pin
Hand lever
1
1
1
Crossway bolt
3
EG-SHW…-HH
Shim ring
1
1
1
2
1
2
Description
Pos.
8
9
10
11
12
1
2
6
7
Spring locking pin
3
4
5
Hand lever
Holder
Quantity
Order-No.
EG-SHW…-QB
Lower assembly
Guiding screw
Cylinder bolt QB
Strap pin
Cylinder bolt BL
Pos.
1
Remove the assembly holder (pos. 4) with components (pos. 2, 3, 5, 6, 9 and 10),
loosen the guide screws (pos 7 and 11).
Description
Upper assembly
Crossway bolt
1
1
2