3
GENERAL AIR TOOL SAFETY WARNINGS
Warning:
Please read, understand, and follow all safety information contained
in these instructions prior to the use of this tool. Failure to follow the warnings and
instructions may result in serious injury. The term “power tool” in the warnings
refers to your Griot’s Garage THE BOSS
™
AIR Micro Rotary Polisher. Retain these
instructions for future reference.
Warning:
Do not operate tool in water or in an excessively wet environment.
Warning:
Do not use disc pads that have a Max RPM less than the tool’s
Max RPM rating.
1. Work Area Safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust. Power tools may create sparks which may
ignite the dust or fumes.
c) Keep children and bystanders away while operating power tool. Distractions can
cause you to lose control.
2. Personal Safety
a) Practice safety requirements. Work alert, have proper attire, and do not operate
tools under the influence of alcohol or drugs.
b) Operators and other personnel must always wear protection for eyes, ears, and
respiratory protection when in the work area or while operating this product.
Follow your employer’s safety policy for PPE’s and/or ANSI Z87.1 or local/
national standards for eye-wear and other personal protective equipment
requirements.
c) Wear protective apparel, taking into consideration the type of work being done.
d) Never exceed marked maximum input pressure (90psi / .62Mpa / 6.2Bars).
e) Stay alert, watch what you are doing, and use common sense when operating
power tool. A moment of inattention while operating power tool may result in
serious personal injury.
f) Remove any adjusting key or wrench before turning the power tool on. A wrench
or a key left attached to a rotating part of the tool may result in personal injury.
g) Maintain a firm grip on the power tool and position your body and arm to allow
you to resist kickback forces.
3. Power Tool Usage Safety
To reduce the risk associated with pneumatic pressure and other mechanical
hazards:
a) This power tool is intended to function as a buffer/polisher. Do NOT perform
operations such as grinding, sanding, wire brushing, or cutting-off with
this power tool. Read all safety warnings, instructions, illustrations, and
specifications provided with this power tool. Failure to follow all instructions may
result in serious injury.
b) Do not use accessories which are not specifically designed and recommended
