Grindmaster 1WD25-4, Service Manual

Page: 9 / 28

Standard Security Kit Includes
D15 D25 D35
ITEM PART # / QTY PART # / QTY PART # / QTY
KIT (contents listed below) 2509 2510 2511
PAD LOCK 1503 / (2) 1503 / (3) 1503 / (4)
COVER LOCK STRAP 2450 / (2) 2451 / (2) 2450 / (2)
VALVE LOCKING BOX 2502 / (1) 2502 / (2) 2502 / (3)
KEY VALVE LOCKING BOX 2503 / (1) 2503 / (2) 2503 / (3)
CHANNEL TOP N/A N/A 2554 / (1)
How to Assemble Bowl Locking Strap
No tools are needed to assemble kit. One pair of Cover Lock
Straps are needed per dispenser. They are designed to work
on 5 gallon bowls only with the double wall bowl cover
#2240. Each pair of cover straps uses one Padlock. The
Model D35 triple bowl unit also requires a top channel bar.
UNPLUG MACHINE BEFORE INSTALLING KIT
1) For - 3 Models (with stainless side panels), hook the
bottom end of the strap into the louvre in the top row
nearest the dispenser’s front on both sides of the
dispenser. (See Figure 1)
For - 4 Models (with plastic side panels), hook the bottom end of the strap
under the second section* of the top louvre on both sides of the dispenser.
(*note the sections under the louvres)(See Figure 1)
2) Bring both tops of the cover straps together (above the bowl cover).
3) Place padlock into the holes of the cover straps and lock together.
Note: D35 only - The top channel is interlocked into place on top of the bowls in
the same manner as described above. Interlock the side without the padlock first.
(See Figure 2)
SECOND SECTION*
FROM THE FRONT -
TOP ROW
FRONT ROW - TOP
STANDARD
- 4’S
FRONT
STANDARD
- 3’S
FRONT
Figure 1
The extended side of the box with the turned-up edge is the top.
1) Place the turned up edge (#1) over the top edge of the handle.
2) Place #2 behind the “Push” part of the handle.
3) Next, raise the box while keeping it pressed against the front panel of the dispenser. Hook the turned-up edge
(#1) over the top of the handle.
4) Slide the locking bar (#3), through the slots (#4).
5) Add the padlock through the hole and lock.
NOTE: Kit designed for “cup activated” handle (pictured). Kit will not work with “non-contact” handle.
Valve Box Locking Installation Instructions for Standard Units
SECURITY KIT INSTALLATION - STANDARD UNITS
The valve security kit locks dispense valve to prevent use when store is closed. The bowl security kit locks the lid on
the bowl to prevent unauthorized access.
Figure 2
PADLOCK HERE
Crathco® Beverage Dispensers Page 8