This is the latest V3 model of Grin's Phaserunner motor
controller. Although most of the details are similar to the V2
user manual, we have updated several of the connector and
wiring specifications as explained here.
1) ) Cycle Analyst Plug WP8 Plug:
This controller now uses
an 8 pin waterproof plug for the Cycle Analyst instead of the 6
pin JST standard from previous controllers. That makes it
compatible with our new CA3-WP display device and the two
extra wires allow for both a motor temperature sensor and
on/off switch to the handlebar
We offer a WP8->JST adapter cable for plug and play
connectivity to those using older CA devices with JST plugs.
This adapter will also short together the on/off switch wires.
2) On/Off Switch Wiring:
By default, the on/off switch wires
inside the throttle heatshrink are disconnected rather than
shorted together. This means that the Phaserunner will not
power on and function until either this switch wires are
connected or a CA3-WP is hooked up.
1
2
3
4
5
6
2
1
CA-DP Plug
(JST-SM)
New WP8 Plug
(HiGo Z812)
WP8->JST
Adapter Cable
On / Off Power Switch
Shorted Together
Brown =
Fwd/Rev
On / Off Power Switch
NOT Shorted by Default
V3 Phaserunner
V2 Phaserunner
