CRYO
Therm
#4500 User’s Manual
Page 4
090205.1.12.16
Control Functions:
1 3 6 7
4 2 5 8 9
1. Power Switch -
Activates all electrical components.
2. Fill Switch -
Activates automatic water level control.
3. Fill LED -
Indicates when tank is filling.
4. Pump Switch -
Activates dual speed circulation pump.
5. Cool Switch -
Activates cooling temperature control.
6. Cool LED -
Indicates temperature control is asking for cooling.
7. Digital Display -
Displays water temperature and temperature control setting.
8. Press-To-Set
Button -
Switches digital display from reading the actual water temperature to reading the
temperature control setting.
9. Adjust Slot -
Adjusts (use small screwdriver supplied) temperature control settings when Press-To-Set button
is pressed.
10 11
13 12
10. High Speed Button -
Switches pump speed from low to high for 20 minutes.
11. Air Control -
Controls air supply to hydrotherapy jets while pumps are running.
12. Drain Valve -
Manually drains tank. Power switch should be switched off.
13. Reset Button
– Press and hold 3 seconds to reset condensing unit controller
