GSS66SS
Page 33
OFF
LO
HI
OFF
LO
HI
SOAP
+
+
+
OFF
LO
HI
OFF
LO
HI
SOAP
+
+
+
TESTING FOR LEAKS - DO THIS BEFORE USING YOUR BBQ
. Note - Do not test for gas
leaks with an open flame. If you smell gas, turn off at the source.
Before first use, at the beginning of each new season, or whenever a gas cylinder is changed,
you must check for gas leaks.
Do so by:
TESTING YOUR BBQ
2
Turn on the gas cylinder
3
Make a soap solution of one part liquid detergent and one part water
• The presence of bubbles indicates a leak. Tighten or
repair as necessary
• Under no circumstances should a naked flame be used
to check for leaks
• If a gas odour is present and no leaks can be found,
do not use the BBQ. Turn the gas off at the source,
disconnect the hose and immediately contact your
BBQ dealer or place of purchase for assistance
5
OFF
LO
HI
OFF
LO
HI
SOAP
+
+
+
Brush the soap solution over all gas connections
4
OFF
LO
HI
OFF
LO
HI
SOAP
+
+
+
1
Turn all gas valves on the BBQ to the off position
OFF
LO
HI
OFF
LO
HI
SOAP
+
+
+
