Grill Chef 12375FT Assembly And Operating Instructions Manual Download Page 10

10

GRILLCHEF

Danger "Gas is highly flammable"

Liquid gas is highly flammable and explosive.

Possible consequences:

•  Serious personal injury or damage to property if escaping gas ignites in an environment 

in which it is not controlled.

Safety precautions:

•  Only use the grill outdoors and ensure the area is well-ventilated.
•  Protect the gas cylinder and the gas hose from direct sunlight and other sources of heat 

(max. 50°C). Take special care to ensure that the gas hose does not touch any hot parts 

of the grill.

•  Do not place the gas cylinder on the lower shelf, as this is too near the bur-

ner.

•  Do not lean over the cooker when igniting the gas flame.
•  Close the valve on the gas cylinder after each use: (turn the valve clockwise).
• 
•  Never leave the grill unattended. If the flame extinguishes, relight it immediately or cut 

off the supply from the gas cylinder.

•  When connecting the gas cylinder make sure that there are no sources of ignition within 

a 5 m radius.

•  Take special care not to light any naked flames, do not smoke or switch on electric appli-

ances (devices, lights, door bells), etc (sparkover possible).

•  Before each use check to ensure that all of the connections through which gas is supplied 

are sealed and intact.

•  If necessary, replace the hose in order to comply with the corresponding national re-

quirements.
The grill must not be used if the connections for the gas supply are porous or faulty. This 

also applies, for example, to hoses or fittings blocked by insects, as this can lead to a 

dangerous flashback.

Summary of Contents for 12375FT





























Reviews: