LineIQ Battery Charger
28 Aug 2012 Edition 1.0 Page 4 of 13
Document No. : GSN-DC-103
1.
THE LINEIQ BATTERY CHARGER
The LineIQ Battery Charger allows the internal sealed lead acid battery in up to three LineIQ
Sensors to be charged.
This manual covers the LineIQ Charger only.
LineIQ batteries can be charged with the LineIQ turned on or turned off. If the is turned on
and a DataLink, PC and Lineman software is available, the operation of the charger can be
verified, provided that the LineIQ battery has sufficient charge to operate the LineIQ.
The Charger can be left connected to the LineIQ indefinitely. The LineIQ Charger provides a
float current to the LineIQ battery when left connected.
GridSense places the highest emphasis on safety. Ensure that only qualified personnel use
the LineIQ Charger.
This manual uses the following International Safety Symbols:
CAUTION, risk of danger: documentation must be consulted in all cases where
this symbol is marked.
Equipment protected throughout by Double Insulation or Reinforced Insulation.
Alternating current.
