background image

SKU 66663 

For technical questions, please call 1-800-444-3353. 

Page 3

save tHis Manual

Keep this manual for the safety warn-

ings and precautions, assembly, operat-

ing, inspection, maintenance and cleaning 

procedures.  Write the product’s serial 

number in the back of the manual near the 

assembly diagram (or month and year of 

purchase if product has no number).  Keep 

this manual and the receipt in a safe and 

dry place for future reference.

iMportant saFety 

inForMation

in this manual, on the labeling, 

and all other information 

provided with this product:

  this is the safety alert 

symbol.  it is used to alert 

you to potential personal 

injury hazards.  obey all 

safety messages that 

follow this symbol to avoid 

possible injury or death.

 

danger indicates 

a hazardous 

situation which, if not 

avoided, will result in death or 

serious injury.
 

Warning 

indicates a 

hazardous situation which, if 

not avoided, could result in 

death or serious injury.
 

caution, used 

with the safety 

alert symbol, indicates a 

hazardous situation which, if 

not avoided, could result in 

minor or moderate injury.

 

notice is used to 

address practices 

not related to personal injury.
 

caution, without 

the safety alert 

symbol, is used to address 

practices not related to 

personal injury.

 Warning! read all instructions.

 

Failure to follow all instructions 

listed below may result in fire, 

serious injury and/or deatH. 

The warnings and precautions 

discussed in this manual cannot 

cover all possible conditions and 

situations that may occur.  It must 

be understood by the operator that 

common sense and caution are 

factors which cannot be built into 

this product, but must be supplied 

by the operator.

save tHese instructions

set up precautions

Gasoline fuel and fumes are flamma-

1. 

ble, and potentially explosive.  Use 

proper fuel storage and handling pro-

cedures.  Do not store fuel or other 

flammable materials nearby.
Have multiple ABC class fire extin-

2. 

guishers nearby.
Operation of this equipment may cre-

3. 

ate sparks that can start fires around 

dry vegetation. 

A spark arrestor may be required. 

The operator should contact local fire 

agencies for laws or regulations relat-

ing to fire prevention requirements.
Set up and use only on a flat, level, 

4. 

well-ventilated surface.

Summary of Contents for 66663



















Reviews:

Related manuals for 66663