GETTING STARTED
OPERATION MODE
LOCK MODE:
is a stabilization mode where the camera maintains orientation
independently of the rest of the gimbal and the orientation can be changed by
an external control signal from remote control or joystick.
FOLLOW MODE:
in this mode the camera will mimic the operator’s movement
and allows one person to control camera tilt and pan without using an external
device like a remote control.
NOTE:
if there is a remote control signal, changing modes or turning motors
on/off by other methods such as using the function button or software will
not take effect because the remote control signal has highest priotity and
override the command.
The GREMSY H3
has 2 operation modes:
SINGLE OPERATOR:
using FOLLOW mode or Joystick to control the direc
-
tion of a camera.
DUAL OPERATOR:
a second operator can use a Remote Controller (SBUS,
SPEKTRUM) or iPad Application with Motion/Gesture Control.
The GREMSY H3 supports:
SWITCHING BETWEEN MODES
USING THE “FUNCTION BUTTON”
USING THE MODE CHANNEL ON REMOTE CONTROL
Pos 01
Pos 02
Pos 03
POSITIONS
MODES
01
Follow mode
Motors on
02
Lock mode
Motors on
03
Motors off
MODE channel
08
PRESS T
IMES
MODE
S
Turn motors on
L
ock mode
Calib Gyros
Fo
llow mode
Hold 3 seconds
Summary of Contents for H3
Page 1: ...GREMSY H3 USER MANUAL Ver 1 6 ...
Page 35: ...gremsy com ...
