GREISINGER EBW 64, Quick Manual

Page: 1 / 4

S45.0.01.6C-04 page 1 of 4
Specification:
Supply: 220-240V AC, 50/60Hz
Power consumption: approx. 15W
Ambient temperature: 0 to +50°C
Storage temperature: -20..60°C
Ambient humidity: 10..70% r.h. (not condensing)
Dimensions: 100 x 75 x 110 (W x H x D)
State display: 3 LED´s: ON Power
Slave: flashes during communication
Short: signals that short circuit was detected on bus
Protection class: IP20
Mounting: wall mounting or hat rail DIN EN 50022
EMC: The EBW64 corresponds to the essential protection ratings established in the
Regulations of the Council for the Approximation of Legislation for the member
countries regarding electromagnetic compatibility (89/336/EWG).
EASY EASY EASY EASY EASY
BUS BUS
BUS BUS BUS
Connection: screw type terminals, terminals EB+ and EB-
Connection cable: we suggest 2-wire twisted pair
Bus load: max. 64
EASY
BUS
standard loads
Cable length: max. 1000m
Baudrate: 4800 baud
Short-circuit control: by detection of a short-circuit the bus power will swtich off for 2 minutes.
RS232 Interface:
Connection: 9-pin SUB-D connector (
for connection to PC with 1:1 RS232-cable
) or screw type terminals
General:
The EBW64 is a bidirectional interface converter for the connection of up to 64
EASY
BUS
sensor modules to
the serial interface of a PC.
EASY EASY EASY EASY EASY
BUS BUS BUS BUS BUS
- Converter
EBW 64
Disposal instruction:
The device must not be disposed in the unsorted municipal waste! Send the device directly to us (sufficiently
stamped), if it should be disposed. We will dispose the device appropriate and environmentally sound.
D - 93128 Regenstauf, Hans-Sachs-Straße 26
Tel.: 0049 9402 / 9383-0
Fax: 0049 9402 / 9383-33
GREISINGER
electronic GmbH