SRT 10/II
USER MANUAL
page 20 of 37
5.8 Brief working instructions
1. Set up instrument:
Connect power supply and printer,
2. Switch on printer and analyzer unit: On the display appears some information (i.e.
software release) and this symbol:
“ . ”
appears for each free channel. It indicates free
positions on which the operator can put samples.
3. Sample identification:
a) Prepare E.S.R. data report form
b) Write name or patient N° on the tube and on the form, following the
channel position.
4. After gently mixing for about 5 min., put the tubes into reading channel, following the form
data.
5. When the instrument has finished measuring, the operator can read or print the results:
a) If printer is connected , there will be an automatic printout
b) If printer is disconnected the operator must read and record on the form
values indicated on the display.
6. After having the results remove tubes :
This symbol
“ . ”
will appear, indicating that this channel position is free for a new test
tube.
Follow points 3 - 6.
