BA660.doc
01/01/97
4 of 25
Tip = Signal Plus +
Ring = Signal Minus -
Sleeve = Shield/Chassis
… C U T T O T H E C H A S E … ! !
… C U T T O T H E C H A S E … ! !
Microphone use
•
Plug the mic into the unit
•
Set the input selector to -45
•
Monitor the input, (Push monitor select button "IN")
•
Set the input selector and trim so that the average signal is around the yellow
led.
•
Set the Threshold control for desired limiting.
•
Set the attack, release and ratio controls to 12:00
•
Monitor the output signal, (Put the monitor select button in the "Out"
position)
•
Set the output gain makeup control for around the yellow LED.
Line level use
•
Plug the Line level signal into the input of the BA-660.
•
Set the monitor selector switch to the input (in) position
•
Set the input selector and trim controls so that the signal is lighting the the
Yellow on the peaks.
•
Set the input selector and trim so that the average signal is around the yellow
led.
•
Set the Threshold control for desired limiting.
•
Set the attack, release and ratio controls to 12:00
•
Monitor the output signal, (Put the monitor select button in the "Out"
position)
•
Set the output gain makeup control for around the yellow LED.
