29
from the obstacle. Reset the work area alarm, if the crane or obstacle is moved, or if a different
size load is lifted.
SETTING POINTS 1 AND 2
1. Press the operator alarm button (Item 1) twice to access the Work Area alarm screen.
2. Move the boom, attachment, load, rigging etc. to the desired LEFT SET POINT.
3. Press the “Left Point” button. The display will read LEFT POINT SET.
Note: Both Left and Right Points must be set for the system to operate correctly. The red warning
light (item 3) will flash and the audible alarm will sound whenever only one of the left/right swing
limits is set.
4. Move the boom, attachment, load, rigging etc. to the desired RIGHT SET POINT.
5. Press the “Right Point” button. The display will read RIGHT POINT SET.
6. The red warning light (item 5) will flash and the audible alarm will sound whenever the boom
tip penetrates the exclusion zone.
7.
Pressing the LEFT POINT and RIGHT POINT buttons again will cancel the alarm and the
display will read LEFT POINT OFF RIGHT POINT OFF.
Summary of Contents for MicroGuard RCI 514
Page 30: ...30...
