GreenWorks STG304 Operator'S Manual Download Page 6

Symbol

Explanation

Do not expose the machine to rain or
moist conditions.

Keep all bystanders at least 15m away.

Do not install or use any type of blade on
the machine or displaying this symbol.

Thrown objects can ricochet and result in
personal injury or property damage.

4

RISK LEVELS

The following signal words and meanings are intended to
explain the levels of risk associated with this product.

SYM-

BOL

SIGNAL

MEANING

DANGER

Indicates an imminently haz-
ardous situation, which, if not
avoided, will result in death
or serious injury.

WARNING

Indicates a potentially hazard-
ous situation, which, if not
avoided, could result in death
or serious injury.

CAUTION

Indicates a potentially hazard-
ous situation, which, if not
avoided, may result in minor
or moderate injury.

CAUTION

(Without Safety Alert Sym-
bol) Indicates a situation that
may result in property dam-
age.

5

SERVICE

Servicing requires extreme care and knowledge and must be
performed only by a qualified service technician. For service
we suggest you return the machine to your nearest
AUTHORIZED SERVICE CENTER for repair. Use only
identical manufacturer’s replacement parts and accessories.

6

ENVIRONMENTALLY SAFE

BATTERY DISPOSAL

The toxic and corrosive materials below are in the batteries
used in this machine: 

Lithium-Ion, a toxic material.

 

WARNING

Discard all toxic materials in a specified manner to prevent
contamination of the environment. Before discarding
damaged or worn out Li-ion battery, contact your local
waste disposal agency, or the local Environmental
Protection Agency for information and specific instructions.
Take the batteries to a local recycling and/or disposal center,
certified for lithium-ion disposal.

 

WARNING

If the battery pack cracks or breaks, with or without leaks,
do not recharge it and do not use. Discard it and replace
with a new battery pack. DO NOT TRY TO REPAIR IT! To
prevent injury and risk of fire, explosion, or electric shock,
and to avoid damage to the environment:

Cover the terminals of the battery with heavy-duty
adhesive tape.

DO NOT try to remove or destroy any of the battery
pack components.

DO NOT try to open the battery pack.

If a leak develops, the released electrolytes are
corrosive and toxic. DO NOT get the solution in the
eyes or on skin, and do not swallow it.

DO NOT put these batteries in your regular household
trash.

DO NOT incinerate.

DO NOT put them where they will become part of any
waste landfill or municipal solid waste stream.

Take them to a certified recycling or disposal center.

7

PROPOSITION 65

 

WARNING

This product contains a chemical known to the state of
California to cause cancer, birth defects or other
reproductive harm. Some dust created by power sanding,
sawing, grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals
are:

Lead from lead-based paints;

Crystalline silica from bricks and cement and other
masonry products;

Arsenic and chromium from chemically treated lumber.

Your risk of exposure to these chemicals varies depending
on how often you do this type of work. To reduce your
exposure to these chemicals, work in a well-ventilated area,
and work with approved safety equipment, such as dust
masks that are specially designed to filter out microscopic
particles.

6

English

EN

Summary of Contents for STG304





























Reviews: