GreenWorks STG304 Operator'S Manual Download Page 12

Problem

Possible Cause

Solution

The line
does not ad-
vance.

Lines are welded
to themselves.

Lubricate with silicone
spray.

Not enough line
on spool.

Install more line.

Lines are worn too
short.

Advance the cutting line.

Lines are tangled
on spool.

1. Remove the lines from
the spool.

2. Wind the lines.

The line
keeps
breaking.

The machine is
used incorrectly.

1. Cut with the tip of the
line, avoid stones, walls
and other hard objects.

2. Advance the cutting
line regularly to keep full
cutting width.

The grass
winds
around the
trimmer
head and
motor hous-
ing.

Cut tall grass at
ground level.

1. Cut tall grass from the
top down.

2. Remove no more than
8" in each pass to prevent
wrapping.

The line
does not cut
well.

The cut-off blade
becomes dull.

Sharpen the cut-off blade
with a file or replace it.

Vibration
increases
obviously.

The line is worn
down at one side
and not advanced
in time.

Make sure that the line on
both sides is normal. Ad-
vance the line.

13

TECHNICAL DATA

Type

Cordless, battery powered

Motor

24V Brushed

No load speed

9000 / 8000 RPM

Cutting line diameter

0.065" (1.65 mm)

Cutting path diameter

10 / 12" (254 / 305 mm)

Feed Type

Auto Feed

Weight (without battery
pack)

5.9 lbs (2.675 kg)

Battery model

29842 and other BAG series

Charger model

29862 and other CAG series

The recommended ambient temperature range:

Item

Temperature

String trimmer storage tem-
perature range

32°F (0°C) - 113°F (45°C)

String trimmer operation
temperature range

32°F (0°C) - 113°F (45°C)

Battery charging temperature
range

39°F (4°C) - 104°F (40°C)

Charger operation tempera-
ture range

39°F (4°C) - 104°F (40°C)

Battery storage temperature
range

32°F (0°C) - 113°F (45°C)

Battery discharging tempera-
ture range

32°F (0°C) - 113°F (45°C)

14

LIMITED WARRANTY

YEAR 
AÑOS

LIMITED WARRANTY

GARANTÍA 

LIMITADA

3

Greenworks hereby warranties this product, to the original
purchaser with proof of purchase, for a period of three (3)
years against defects in materials, parts or workmanship.
Greenworks, at its own discretion will repair or replace any
and all parts found to be defective, through normal use, free
of charge to the customer. This warranty is valid only for
units which have been used for personal use that have not
been hired or rented for industrial/commercial use, and that
have been maintained in accordance with the instructions in
the owners’ manual supplied with the product from new.

ITEMS NOT COVERED BY WARRANTY:

1. Any part that has become inoperative due to misuse,

commercial use, abuse, neglect, accident, improper
maintenance, or alteration; or

2. The unit, if it has not been operated and/or maintained in

accordance with the owner's manual; or

3. Normal wear, except as noted below;
4. Routine maintenance items such as lubricants, blade

sharpening;

5. Normal deterioration of the exterior finish due to use or

exposure.

HELPLINE:

Warranty service is available by calling our toll-free helpline,
at 1-888-909-6757.

12

English

EN

Summary of Contents for STG304





























Reviews: