Problem
Possible cause Solution
The bar and
chain gets too
hot and can not
cut.
The chain ten-
sion is too tight
or too loose.
Refer to Adjust
the Chain Ten-
sion in the man-
ual.
The chain is dull
Sharpen or re-
place the chain.
The chain is put
on backwards.
Take out the
chain and turn it
in the right direc-
tion.
The motor runs,
but the chain
does not cut cor-
rectly, or the mo-
tor stops after
around 3 sec-
onds.
When you use
the machine un-
der load, it
stops.
1. Release the
trigger.
2. Start the ma-
chine again.
The chain is not
lubricated.
Lubricate the
chain to de-
crease the fric-
tion.
12
TECHNICAL DATA
Voltage
24V DC
Guide bar length
8'' (200 mm)
Chain pitch
3/8" LP (9.5 mm)
Chain gauge
.050" (1.3 mm)
Chain oil capacity
80 ml
Weight (without battery
pack)
8.2 lbs (3.7 kg)
Chain
91PJ033X/CL15033X/
91YOS-33E
Guide bar
080NDEA318/
M1500833-1318TL/
ES080SDEA318
The recommended ambient temperature range:
Item
Temperature
Appliance storage temper-
ature range
32°F (0°C) - 113°F (45°C)
Appliance operation tem-
perature range
32°F (0°C) - 113°F (45°C)
Battery charging tempera-
ture range
39°F (4°C) - 104°F (40°C)
Charger operation temper-
ature range
39°F (4°C) - 104°F (40°C)
Battery storage tempera-
ture range
32°F (0°C) - 113°F (45°C)
Item
Temperature
Battery discharging tem-
perature range
32°F (0°C) - 113°F (45°C)
13
LIMITED WARRANTY
YEAR
ANS
AÑOS
LIMITED WARRANTY
GARANTIE LIMITÉE
GARANTÍA
LIMITADA
3
Greenworks hereby warranties this product, to the
original purchaser with proof of purchase, for a period
of three (3) years against defects in materials, parts
or workmanship. Greenworks, at its own discretion, will
repair or replace any and all parts found to be defective,
through normal use, free of charge to the customer.
This warranty is valid only for units which have been
used for personal use that have not been purchased
or rented for industrial/commercial use, and that have
been maintained in accordance with the instructions
in the owners’ manual supplied with the product when
new.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to
misuse, commercial use, abuse, neglect, accident,
improper maintenance, or alteration; or
2. The unit, if it has not been operated and/or
maintained in accordance with the owner's manual;
or
3. Normal wear;
4. Routine maintenance items such as lubricants,
blade sharpening;
5. Normal deterioration of the exterior finish due to use
or exposure.
HELPLINE:
Warranty service is available by calling our toll-free
helpline at 1-888-909-6757.
TRANSPORTATION CHARGES:
Transportation charges for the movement of any power
equipment unit or attachment are the responsibility of
the purchaser. It is the purchaser’s responsibility to
pay transportation charges for any part submitted for
replacement under this warranty unless such return is
requested in writing by Greenworks.
USA address:
Canadian address:
13
English
EN
