EN - 6
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
NAME
DESIGNATION/EXPLANATION
V
Volts
Voltage
A
Amperes
Current
Hz
Hertz
Frequency (cycles per second)
W
Watt
Power
no
No Load Speed
Rotational speed, at no load
Alternating Current
Type of current
.../min
Per Minute
Revolutions, strokes, surface speed, orbits
etc., per minute
Safety Alert
Indicates a potential personal injury hazard.
Read Operator’s Manual
To reduce tthe risk of injury, user must read
and understand operator’s manual before
using this product.
Eye Protection
Always wear eye protection with side shields
marked to comply with ANSI Z87.1.
Wet Conditions Alert
Do not expose to rain or use in damp
locations.
Risk of Injection
To reduce the risk of injection or injury, never
direct a water system towards people or pets
or place any body part in the stream. Leaking
hoses and fittings are also capable of causing
injection injury. Do not hold hoses or fittings.
Kickback
To reduce the risk of injury from kickback,
hold the spray wand securely with both hands
when the machine is on.
Electric Shock
Failure to use in dry conditions and to
observe safe practices can result in electric
shock.
Chemical Burns
To reduce the risk of injury or damage, DO
NOT USE ACIDS, ALKALINES, BLEACHES,
SOLVENTS, FLAMMABLE MATERIAL, OR
INDUSTRIAL GRADE SOLUTIONS in this
product.