GreenWorks G48HT, Operator'S Manual

Page: 6 / 128

Problem Possible cause Solution
There is too much
noise and/or vibra-
tion during opera-
tion.
The parts are loos-
en.
1. Stop the ma-
chine.
2. Remove the
battery.
3. Inspect for
damage.
4. Check and
tighten loose
parts.
The parts have
damage.
Do not use the ma-
chine and speak to
service center.
8 TECHNICAL DATA
Voltage 48V
No load speed 3000(±10%) /
min
Blade speed 3000(±10%) /
min
Blade length 610 mm
Cutting capacity 27 mm
Weight (without battery pack) 2.8 kg
Measuered sound pressure level 76.6 dB(A),
K
PA
=3 dB(A)
Guaranteed sound power level 100 dB(A)
Vibration <2.5 m/s
2
Uncertainty 1.5 m/s
2
9 WARRANTY
(The full warranty terms and conditions can be found on
Greenworks webpage)
The Greenworks warranty is 3 years on the product, and 2
years on batteries (consumer/private usage) from the date of
purchase. This warranty covers manufacturing faults. A faulty
product under warranty might be either repaired or replaced.
A unit that has been misused or used in other ways then
described in the owner’s manual might be rejected for
warranty. Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not affected
by any additional warranty offered by a dealer or retailer.
A faulty product must be returned to the point of purchase in
order to claim for warranty, together with the proof of
purchase (receipt).
10 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name: GLOBGRO AB
Globe Group Europe
Address: Propellergatan 1, 211 15 Malmö, Sweden
Name and address of the person authorised to compile the
technical file:
Name: Peter Söderström
Address: Propellergatan 1, 211 15 Malmö, Sweden
Herewith we declare that the product
Category: Hedge Trimmer
Model: 2205007 (HTM302)
Serial number: See product rating label
Year of Construction: See product rating label
• is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
• is in conformity with the provisions of the following
other EC-Directives:
• 2014/30/EU
• 2000/14/EC & 2005/88/EC
• 2011/65/EU & (EU)2015/863
Furthermore, we declare that the following parts, clauses of
European harmonised standards have been used:
• EN 60745-1,EN 60745-2-15,EN 55014-1,EN 55014-2,
EN ISO 3744,ISO 11094,IEC 62321-3-1,IEC 62321-4,
IEC 62321-5,IEC 62321-6,IEC 62321-7-1,IEC
62321-7-2, IEC 62321-8
Measured sound pow-
er level: L
WA
: 98.6 dB(A)
Guaranteed sound
power level: L
WA.d
: 100 dB(A)
Conformity assessment method to Annex V / Directive
2000/14/EC.
Place, date: Malmö,
03.03.2019 Signature: Ted Qu, Quality Director
6
English
EN