BATTERY CHARGER
4
NOTE:
The battery is not shipped fully charged. It is recommended to fully charge before first use
to ensure that maximum run time can be achieved. This lithium-ion battery will not develop a memory
and may be charged at any time.
This is a diagnostic charger. The Charger LED Lights will illuminate in specific order to communicate
the current battery status. They are as follows:
SPECIFICATIONS
CHARGING PROCEDURE
Input: 120VAC, 60Hz, Max. 5A
80V charger: 2901402
Output: 80VDC
Weight: 3.3 lbs (1.5kg)
Charging
Fully
Charged
Over
Temperature
Charging
Fault
LED STATUS
DESCRIPTION
Blinking Green
Charging
Solid Green
Fully Charged
Solid Red
Over Temperature
Blinking Red
Charging Fault
•
Insert the battery into the charger.
A fully discharged battery pack will require approximately 30 minutes to fully charge from a discharged
state. Plug the charger into an AC power outlet.
False defect note:
When the battery is inserted into the charger and the status LED blinks RED, remove the battery from
the charger for 1 minute, then reinsert. If the status LED blinks GREEN, then the battery is properly
charging. If the status LED is still blinking RED, remove the battery and unplug the charger for 1 minute.
After 1 minute, plug in the charger and reinsert the battery. If the status LED blinks GREEN, then the
battery is properly charging. If the status LED is still blinking RED, the battery is defective and needs to
be replaced.
