7
EN
6.2 EXAMINE THE CHARGER
If the battery pack does not charge correctly:
1. Examine the current of the power outlet with different machines. Make
sure that the outlet works.
2.
Examine that the charger contacts are not short-circuited.
3.
If the charger is not under usual room temperature, move the charger and
battery pack to a location where the temperature is between 6° C to 40°
C (42.8° F to 104° F) .
WARNING!
If you attempt to charge the battery pack in a warm or hot environment, and the
charger LED light is red, remove the battery pack and let the battery cool for
approximately 30 minutes.
6.3 MOUNT THE CHARGER
1.
Get the location of the wall to attach the charger.
2. Use 2 wood screws to attach the charger on the wood studs.
3.
For charger 29482/CAF806: Drill two holes 5.0 in. (127mm) on center
ensuring they are level. For charger 29492: Drill two holes 5 3/4” (145mm)
on center ensuring they are level. For charger CAF814: Drill two holes
4.4” (112 mm) on center ensuring they are level. For charger CAF826/
CAF822: Drill two holes 3.7” (95.5mm) on center ensuring they are level.
For charger CAF820: Drill two holes 5.1” (130mm) on center ensuring
they are level.
4. Use wall anchors and screws to attach the charger to the drywall.
29482/CAF806
CAF814
