MAINTENANCE
IMPELLOR REPLACEMENT
17
• Remove the nut from the
left hand side of the impellor
shaft.
• Remove the nut from the
impellor shaft.
• Remove the pulley and belt.
• Withdraw the old/damaged
impellor. Be sure to keep
the 2 spacer washers from
the right hand side of the
impellor.
• Remove the 10 screws
from the side cover.
• Remove the 3 screws
holding the pulley support
plate.
• Remove the 2 screws and
2 washers.
• Remove the impellor shaft
nut from the right hand
side.
• Insert the impellor shaft in
the new impellor and place
the 2 washers on the right
hand side.
• Be sure not to lose the 2
springs.
• Remove the plate and the
two spacer washers.
• Withdraw the impellor shaft
from the left hand side.
spring
spacer washer
spacer washer
screw and washer
1
4
7
10
2
5
8
11
3
6
9
12
