background image

Ampere rating (on the plate)

0 -

2.0

2.1 -

3.4

3.0 -

3.5

5.1 -

7.0

7.1 -

12.0

12.1 -

16.0

Cord

length

Wire size (A.W.G)

25'

16

16

16

16

14

14

50'

16

16

16

14

14

12

100'

16

16

14

12

12

-

Used on 12 gauge - 20 amp circuit

AWG = American Wire Gauge

Keep the extension cord clear of the working area. Position
the cord so that it will not get caught on lumber, tools, or
other obstructions while you are working with a power tool.
Failure to do so can result in serious personal injury.

Check extension cords before each use. If damaged replace
immediately. Never use the product with a damaged cord
since touching the damaged area could cause electrical shock
resulting in serious injury.

4

SYMBOLS ON THE PRODUCT

Some of the following symbols may be used on this tool.
Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the
tool better and safer.

Symbol

Explanation

Alternating current

Precautions that involve your safety.

Read and understand all instructions
before operating the product, and fol-
low all warnings and safety instruc-
tions.

Thrown objects can ricochet and re-
sult in personal injury or property
damage. Wear protective clothing and
boots.

Keep feet away from openings while
the product is running.

Symbol

Explanation

Keep hands away from the discharge
area.

Stop the motor and unplug the prod-
uct before leaving the product.

Wear eye and ear protection.

Do not use a damaged power cord.

5

RISK LEVELS

The following signal words and meanings are intended to
explain the levels of risk associated with this product.

SYM-

BOL

SIGNAL

MEANING

DANGER

Indicates an imminently haz-
ardous situation,which, if not
avoided, will result in death
or serious injury.

WARNING

Indicates a potentially hazard-
ous situation,which, if not
avoided, could result in death
or serious injury.

CAUTION

Indicates a potentially hazard-
ous situation, which, if not
avoided, may result in minor
or moderate injury.

CAUTION

(Without Safety Alert Sym-
bol) Indicates a situation that
may result in property dam-
age.

6

INSTALLATION

 

WARNING

Do not change or make accessories that are not
recommended by the manufacturer.

 

WARNING

Do not connect to power supply until you assemble all the
parts.

7

English

EN

Summary of Contents for 2600502














Reviews: