6. Remove the screws that secure the left side plate.
7. Pull the axle and remove the old impeller, install the new
impeller.
8. Reinstall the nut and right side cover.
8.4
STORE THE MACHINE
• Clean the machine before storage.
• Make sure the motor is not hot when you store the
machine.
• Make sure that the machine does not have loose or
damaged parts. If it is necessary, do these steps/
instructions:
• Replace the damaged parts.
• Tighten the bolts.
• Speak to a person at an approved service center.
• Store the machine in a dry area.
• Make sure that children cannot come near the machine.
9
TROUBLESHOOTING
Problem
Possible cause
Solution
The handle is not
in position.
The bolts are not
engaged correctly.
Adjust the height
of the handle and
make sure that the
knobs and bolts
are aligned cor-
rectly.
The machine does
not start.
The switch is de-
fective.
Have the switch
replaced by an au-
thorized service
center.
The extension
cord is not connec-
ted to the plug.
Connect the plug
on the machine to
the extension cord.
The extension
cord is not connec-
ted to the power
source.
Plug the extension
cord into a live
120 V AC, 60 Hz
outlet.
The engine is on,
but the impeller
does not turn.
The belt is dam-
aged.
Replace the belt.
12
English
EN
5. Using a socket wrench, remove the large pulley.
9. Reinstall the left side plate, large pulley, belt and left side
cover.
Summary of Contents for 2600502
Page 1: ...SNA106 2600502 GWSN20130...
