22
The most typical cutting application is to position the unit at an angle of 60° or less, depending
Remove long branches in several stages.
balance.
Keep the tree between you and the chain while limbing. Cut from side of tree opposite branch
you are cutting.
Do not cut from a ladder. This is extremely dangerous. Leave this operation for professionals.
out to reduce the weight. Following proper cutting procedures will prevent stripping the bark
from the main member.
Do not use the pole saw for felling or bucking.
To prevent electrocution, do not operate within 50' (15 m) of overhead electrical lines.
Keep bystanders at least 50' (15 m) away.
OPERATION
Fig. 13
Fig. 14
60°
MAXIMUM
MINIMUM
50’ (15 M)
Summary of Contents for 20192
Page 31: ...32 EXPLODED VIEW...
