17
OPERATION
Use a lubricant that is designed for chains and chain oilers, and is formulated to perform over a
wide temperature range with no dilution required.
NOTE: Pole saw comes from the factory with no bar and chain oil added. Level should also be checked after
Remove oil cap.
Carefully pour the bar and chain oil into the tank.
Wipe off excess oil.
Repeat as needed.
NOTE: Do not use dirty, used or otherwise contaminated oils. Damage may occur to the bar or chain.
NOTE: It is normal for oil to seep from the saw when not in use. To prevent seepage, empty the oil tank after
each use, then run for one minute. When storing the unit for a long period of time (three months or longer), be
sure the chain is lightly lubricated. This will prevent rust on the chain and bar sprocket.
I M P O R T A N T :
To preserve natural resources, please recycle or dispose of oil properly. Consult your local waste
management authority for information regarding available recycling and/disposal options.
Summary of Contents for 20192
Page 31: ...32 EXPLODED VIEW...
