background image

Symbol

Explanation

Wear eye protection

Do not expose the product to rain or
moist conditions.

Wear a dust mask

No Hands Symbol

No Hands Symbol

No Hands Symbol

Hot Surface

6

RISK LEVELS

The following signal words and meanings are intended to
explain the levels of risk associated with this product.

SYM-

BOL

SIGNAL

MEANING

DANGER

Indicates an imminently haz-
ardous situation, which, if not
avoided, will result in death
or serious injury.

WARNING

Indicates a potentially hazard-
ous situation, which, if not
avoided, could result in death
or serious injury.

CAUTION

Indicates a potentially hazard-
ous situation, which, if not
avoided, may result in minor
or moderate injury.

CAUTION

(Without Safety Alert Sym-
bol) Indicates a situation that
may result in property dam-
age.

7

RECYCLE

Separate collection. You must not discard
with usual household waste. If it is necessa-
ry to replace the machine, or if it is no more
use to you, do not discard it with household
waste. Make this machine available for sepa-
rate collection.

Separate collection of used machine and
packaging let you recycle materials and use
them again. Use of the recycled materials
helps prevent environmental pollution and
decreases the requirements for raw materi-
als.

At the end of their useful life, discard batter-
ies with a precaution for our environment.
The battery contains material that is danger-
ous to you and the environment. You must
remove and discard these materials separate-
ly at a equipment that accepts lithium-ion
batteries.

8

INSTALLATION

8.1

UNPACK THE MACHINE

 

WARNING

Make sure that you correctly assemble the machine before
use.

 

WARNING

If parts of the machine are damaged, do not use the
machine.

If you do not have all the parts, do not operate the
machine.

If the parts are damaged or missing, contact the service
center.

1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with local

regulations.

8.2

INSTALL THE BATTERY PACK

Figure 2.

5

English

EN

Summary of Contents for 1500907AU










Reviews: