manualshive.com logo in svg

GreenWorks 1400102, Owner'S Manual

Share
Download
GreenWorks 1400102 Owner'S Manual Download Page 9

9

UNPACKING 

This product has been shipped completely assembled. 

• 

Carefully remove the product and any accessories from the box. Make sure that all items 

listed in the packing list are included. 

• 

Inspect the product carefully to make sure no breakage or damage occurred during shipping. 

• 

Do not discard the packing material until you have carefully inspected and satisfactorily 

operated the product. 

• 

If any parts are damaged or missing, please call 1-888-909-6757 for assistance. 

PACKING LIST 

• 

Pole saw 

• 

Scabbard

• 

Owner's Manual 

W A R N I N G

If any parts are damaged or missing, do not operate this product until the parts are replaced. 

Failure to heed this warning could result in serious personal injury. 

W A R N I N G

Do not attempt to modify this product or create accessories not recommended for use with this 

product. Any such alteration or modification is misuse and could result in a hazardous condition 

leading to possible serious personal injury. 

W A R N I N G

Do not fit on the battery until assembly is complete. Failure to comply could result in accidental 

starting and possible serious personal injury. 

ASSEMBLY INSTRUCTIONS

Summary of Contents for 1400102

































Reviews:

No comments

Brands by name

Popular brands

Load more brands