manualshive.com logo in svg

GreenWorks 1400102, Owner'S Manual

Share
Download
GreenWorks 1400102 Owner'S Manual Download Page 16

16

ADJUSTING TELESCOPING POLE 

(See Figure 6)

• 

Remove the battery pack from the pole saw.

• 

Rotate the collar counterclockwise to loosen.

• 

Push poles towards each other to shorten the pole or pull away from each other to lengthen 

the pole.

NOTE: Extend the pole only to the length required to reach the limb being cut. Do not extend the handle 

above waist height.

• 

When the desired length is achieved, rotate the collar clockwise to secure.

NOTE: Adjust hand placement on the shaft of the pole saw to keep proper balance. Do not attempt to use the 

pole saw at a length which does not allow you to achieve proper footing and balance at all times.

ASSEMBLING THE POLES 

(See Figure 6)

• 

Remove the battery pack from the pole saw.

• Insert handle pole into intermediate pole or powerhead pole firmly.
• 

Turn the collar clockwise to lock the poles together.

NOTE: Assemble poles only to the length required to reach the limb being cut. Do not extend the handle 

above waist height.

NOTE: Adjust hand placement on the shaft of the pole saw to keep proper balance. Do not attempt to use the 

pole saw at a length which does not allow you to achieve proper footing and balance at all times.

Fig. 6

OPERATING YOUR POLE SAW

Collar

Summary of Contents for 1400102

































Reviews:

No comments

Brands by name

Popular brands

Load more brands