16
MAINTENANCE
REPLACING THE SCRAPER
(See Figures 10-11)
W A R N I N G
IN ORDER TO AVOID SERIOUS PERSONAL INJURY, TURN THE SNOW SHOVEL
OFF AND REMOVE BATTERY BEFORE PERFORMING ANY MAINTENANCE.
Use only the manufacturer's original replacement parts.
• Place the snow shovel on the ground or on a work bench. Position the snow shovel so that
the impeller is facing up.
• Remove the four screws that are located beneath the impeller that secure the scraper to
the housing using a Phillips screwdriver. (Fig. 10)
• Remove the scraper, and discard it in the proper manner. (Fig. 11)
• Snap the new scraper into position, and attach it to the snow shovel by reinstalling the
four screws.
scraper
Fig. 11
4 screws
scraper
Fig. 10
