BATTERY & CHARGER MAINTENANCE
13
CHARGING PROCEDURE
NOTE
: The battery is not shipped fully charged. It is recommended to fully charge before first
use to ensure that maximum run time can be achieved. This lithium-ion battery will not develop a
memory and may be charged at any time.
Low voltage charging:
If the battery has been stored with little to no charge for a long period of time, the charger will go
into recovery mode, which will take 20 hrs to fully charge the battery. This will enhance the life of
the battery. Once it is fully charged, the next charge will return to standard charging.
1. Plug the charger into an AC power outlet.
2. Insert the battery pack into the charger.
This is a diagnostic charger. The Charger LED Lights will illuminate in specific order to
communicate the current battery status. They are as follows:
False defect note:
When the battery is inserted into the charger and the status LED blinks RED, remove the battery
from the charger for 1 minute, then reinsert. If the status LED blinks GREEN, then the battery
is properly charging. If the status LED is still blinking RED, remove the battery and unplug the
charger for 1 minute. After 1 minute, plug in the charger and reinsert the battery. If the status LED
blinks GREEN, then the battery is properly charging. If the status LED is still blinking RED, the
battery is defective and needs to be replaced.
Charging
Fully
Charged
Over
Temperature
Charging
Fault
LED STATUS
DESCRIPTION
Blinking Green
Charging
Solid Green
Fully Charged
Solid Red
Over Temperature
Blinking Red
Charging Fault
Summary of Contents for HT60L00
Page 19: ...EXPLODED VIEW 19 ...
Page 41: ...PLANO DE DESPIECE 20 ...