7
INSTALL THE POWER CORD
STORAGE ARMS
9
1. Attach each of the power cord storage arms (9) into the
two separate positions on the lower handle of the fixture.
2. Align the screw with the holes in each of the two power
cord storage arms (9).
3. Push the screw through and tighten both power cord
storage arms (9) with a Phillips head screw driver (not
included).
8
INSTALL THE UPPER HANDLE
15
15
23
24
14
1. Align the holes on the upper handle (23) and the lower
handle (24).
2. Insert the handle bolts (14) and use the handle knobs (15)
to tighten them.
9
INSTALL THE SPRAY WAND
1
4
1. Push the end of the spray wand (4) into the trigger handle
(1) and rotate clockwise to secure.
2. Pull on the spray wand (4) to be certain it is properly
secured.
WARNING
Make sure that the connection has no leakage.
10
INSTALL THE HIGH
PRESSURE HOSE
26
11
16
1. Push and turn clockwise one end of the high pressure
hose (11) into the inlet coupler (26).
2. Install and tighten the other end of the high pressure hose
onto the water outlet (16) coupler.
11
OPERATION
WARNING
Make sure that all the connections are tight and have no
leakage before operation.
WARNING
The pump will gradually become hot in operation, beware
of scalding.
8
English
EN
