7.5
INSTALL THE MULCH PLUG
6
10
1. Remove the grass catcher.
2. Open the rear discharge door (6) and hold it.
3. Hold the mulch plug (10) by its handle and fit it in
the discharge chute.
4. Close the rear discharge door.
7.6
SET THE CUTTING HEIGHT
The machine can be set to different cutting heights.
8
1. Pull the height adjustment lever (8) rearward to
increase the cutting height.
2. Pull the height adjustment lever forward to decrease
the cutting height.
7.7
INSTALL THE BATTERY PACK
6
16
17
18
WARNING
• If the battery pack or charger is damaged, replace
the battery pack or the charger.
• Stop the machine and wait until the engine stops
before you install or remove the battery pack.
• Read, know, and do the instructions in the battery
and charger manual.
NOTE
The machine has an automatic switch function that
lets the other battery work when the first cannot
operate.
1. Open the battery door (6).
2. Align the ribs on the battery pack with the grooves in
the battery compartment.
3. Push the battery pack (17) into the battery
compartment until the battery pack locks into place.
4. When you hear a click, the battery pack is installed.
5. Close the battery door.
NOTE
The motor starts only when you put in the safety key
(16).
7.8
REMOVE THE BATTERY PACK
1. Remove the safety key (16).
2. Open the battery door.
3. Push and hold the battery release button (18).
4. Remove the battery pack from the machine.
10
English
EN
