7
6
Wall Mounted with side exit installation
5
7
10
6
8
9
●
Cut an opening through the ceiling for
the exhaust outlet and cable if surface
mounted, or for the fan if recess
mounting.
●
First fix backplate to ceiling and
terminate mains supply cable into
isolator connector. Fix connector and
cable clamp to backplate.
●
Fit cosmetic sleeve over fan body if
required and locate fan onto first fix
backplate and screw in position. Fit
front cover and secure with 2 screws
supplied.
●
Fit 100mm duct and external grille/
baffle for soffit or wall application,
making sure duct has a slight fall to
exterior.
Note: Remove backdraught shutter flap if
using flexible duct.
Ceiling Mounting
Flexible Ducting
External Grille
or Airbrick
GG42 or RAB
DO NOT DISTORT BACKPLATE WHEN FITTING
See page 10 for wiring instructions
NOTE: Remove shutter flap if using flexible duct
12
11
Surface Mounted
Recessed Mounted
Tighten 3 screws to secure
SK200 install AW 3.6.10 4/6/10 01:58 Page 6