OPERATING INSTRUCTIONS
BEFORE OPERATING YOUR MAKE SURE THAT THE THROTTLE GRIP IS NOT ROTATED
TO THE "ON" POSITION!!! MAKE ALSO SURE THAT YOUR THROTTLE IS NOT "STICKY" AND ROTATES
FREELY BACK TO THE INITIAL POSSITION
16
MOTORINO
TM
The distance and speed depend upon the riding style and the road conditions. A constant
speed and less stops will ensure longer range. Other factors include weather, vehicle
condition, and battery charge. Drivers must be cautious when driving on rough roads, in poor
weather, or when the battery charge is low. Always check the battery gauge while you are
riding and be sure that it does not get too low too often.
1. Position yourself behind the handlebar with your feet on both sides of your bike and turn
the ignition key on. Do not turn it on when you are beside the bike.
2. Push the bike forward to release it from the main kick stand and then turn the Throttle
gradually to accelerate. Do not turn the Throttle until you are in position to drive.
3. To prevent losing control of the vehicle, please turn the Throttle slowly until the speed
increases. This will also protect your battery from stress, increase your range and prolong
battery life.
4. To stop, release the throttle and apply the front and rear brake simultaneously. You can
decelerate by slightly pressing the brakes to start regeneration mode. The noise and slight
vibration caused by regeneration is normal.
6. When you change direction turn on the signal switch left or right and don't forget to press it
to turn it off.
7. The Brushless motor makes a small electromagnetic noise when accelerating.
8. Always remove the key from the ignition when not using the bike.
9. We suggest you use the main kickstand rather than the side one.
Summary of Contents for MOTORINO XPv
Page 23: ...22 NOTES ...
Page 24: ...26 NOTES 23 ...
