Greenway Home Products GWF7 Use & Care Manual Download Page 8

When not using the water filtration system for more than a week or
when going on vacation, please ensure the lower chamber is full and
the filter immersed in water, as the multi-stage filter will dry out. Always
drain out any residual water when ready to start using it again. If the
water filtration system has not been used for an extended period of
time, please replace the multi-stage filter and rinse out top and
bottom chambers.

GOING AWAY ON VACATION

TROUBLESHOOTING

Water is 
leaking out

1.

The water filtration 

system is not sitting 
straight or the float 
mechanism is obstructed.

2.

The float seal is not 

inserted correctly or is 
not sealing due to residue
or  charcoal particles.

Make sure the water 
filtration system is sitting 
flat on the water 
dispenser (make sure the 
bottle support collar or 
the spike has been 
removed).

Ensure the float seal
is inserted correctly 
and any residue is 
wiped away.

Water will 
not filter

1.

The lower chamber is 

full of water which is 
causing it to overflow.

2.

Pre-filtration system

is blocked.

3.

Multi-stage filter

is blocked. 

Drain out some of 
the water.

Do not add water to 
the upper chamber if 
the lower chamber is full.

Replace pre-filtration 
system.

Replace with new 
Greenway

®

Long Life

Multi-Stage Filter.

Problem

Possible Cause

Suggested Solution

7

Summary of Contents for GWF7









Reviews: