Filling the Filtration System
1.
Remove the top cover.
2.
Pour cold tap water into the upper chamber. (For best results
always use "COLD" tap water) CAUTION – NEVER USE HOT
WATER! NEVER REMOVE THE WATER FILTRATION SYSTEM TO
FILL AT THE SINK, ALWAYS USE A PITCHER TO FILL!
3.
Use the guide on the side of the chamber so you don’t overfill. TO
AVOID LEAKING, DO NOT EXCEED THE 7 L (1.8 gal) MAX.
4.
Replace the top cover.
5.
For best results, add water regularly to ensure the multi-stage filter
is immersed in the lower chamber at all times between the "MIN”
and “MAX" levels indicated on the lower chamber.
CAUTION!
Never use water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or after the
filtration system.
Helpful Tips
1.
Keep your water filtration system in a dry place and out of
direct sunlight.
2.
Do not add water when the lower chamber is full to avoid water
overflowing. Use the guide on the side of the lower chamber and
add water to the upper chamber only when needed. DO NOT
EXCEED THE "MAX" LEVEL ON THE LOWER CHAMBER GUIDE!
3.
For best filtration results, the multi-stage filter should remain
immersed between the “MIN” and “MAX” levels indicated on the
lower chamber.
4.
Never use hot water for filtering or soaking.
5.
Your Greenway
®
Long Life Multi-Stage Filter will last up to 6 months
and filter over 800 litres (211 gallons) of water.
6.
The top cover has a filter replacement reminder that will indicate
when it is time to change your filter,
(see Electronic Filter Change
Reminder on page 2).
7.
When replacing the multi-stage filter, you should rinse out the
entire water filtration system.
8.
Use only Greenway
®
approved Long Life Multi-Stage Filters (GWF3).
Follow the replacement instructions on the filter carton.
9.
Always fill the upper chamber of the water filtration system using a
pitcher of water while it is on top of your water dispenser. Never
remove the water filtration system or upper chamber to fill.
4
MAINTENANCE, CLEANING, STORAGE
