6
INSTALLATION INSTRUCTIONS
5. Locate Top drawer (E
)
and Bottom drawer (F)
and set aside. Fully extend lower drawer glide
tracks. With the help of another adult, hold the
extended glide in one hand and the drawer in
the other. Gently place the back of the drawer
box into the metal hook located on the back
of the drawer track. Once the glide hook has
been slide into the hole in the back of the
drawer box, gently lower the drawer box down
onto the extended glide tracks. At the same
time depress both of the glide handles and
allow the drawer box to fully rest on the glide
tracks. Test to see if the drawer box is fully
engaged. If the drawer box can still be lifted
off the glide track then start again from the
beginning. Never force anything or else
damage to the drawer or glide hardware could
result. Repeat for both drawers. The drawers
location can be adjusted slightly up or down
by twisting the adjuster knob next to the glide
handles.
6. Apply silicone caulk (not included) to unpolished
side and bottom of backsplash (C). Position
backsplash (C) on top (B) and against wall.
Clean any excess caulk before allowing
to dry.
Assembly is now complete. Install desired
faucet and drain assemblies (neither included)
if not already done at step 4. Per the
manufacturers’ instructions to complete the
installation.
5
6
C
B
1
