Greentel R201GC55-232, User Manual, Page: 72 / 72

Annex: FCC RF Exposure requirements:
To maintain compliance with FCC RF exposure requirements, use handset that maintain a 20cm
separation distance between the user's body and the host.
MPE limit for RF exposure at prediction frequency is 0.558mW/cm2 for 850MHz band and
1mW/cm2 for 1900MHz band. The maximum MPE for 850MHz band is 0.333 mW/cm2 and
0.415mW/cm2 for 1900MHz band. It satisfy RF exposure compliance.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE:
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s authority
to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help