Greentel R201GC55-232 User Manual Download Page 31

- 31 - 

MTU 

Set the Maximum transmission Unit. 

1500 

MRU 

Set the Maximum receiving Unit. 

1500 

TX queue length 

Set transmission Queue Length. 

Enable IP head 
compression

Select to enable IP Head compression. 

Disabled 

Use default 
asyncmap

Select to enable asyncmap, an 
advanced PPP option. 

Disabled 

Use peer DNS 

Select to use the DNS allocated by the 
mobile operator. 

Enabled 

Link Detection 
Interval 

Set length time for the interval of link 
detection.

30 Seconds 

Link Detection Max 
Retries 

Set the maximum number of trials for link 
detection failure. 

3

Debug 

Select to enable Debug mode. 

Enabled 

Expert Options 

To provide extra PPP parameters, which 
users generally do not need to set. 

Blank

ICMP Detection 
Server

Set the ICMP detection server, leaving 
blank means not to enable ICMP 
detection.

Blank

ICMP Detection 
Interval 

Set length time for the interval of ICMP 
detection.

30 Seconds 

ICMP Detection 
Timeout 

Set the length of time over which ICMP 
detection will get timeout. (System will 
reboot on detection timeout.) 

5 Seconds 

ICMP Detection Max 
Retries 

Set maximum number of trials when 
ICMP detection fails. 

5

4.4.2 Network -> LAN 

This page allows user to configure the LAN ports, setting the IP address, netmask, MTU, 

etc.

LAN

Overall description: set the LAN port parameters. 

Item  

Description 

Default 

Value 

MAC Address 

Set the MAC address of the
LAN port. 

Globally unique MAC 
address.

Summary of Contents for R201GC55-232









































































Reviews: