Greentek Alaska Island inox, Manual

Page: 20 / 28

20
TÖÖTAMINE
Kontsentreeritud köögiaurude korral kasutage kõrget imemiskiirust.
Kubu imemisfunktsioon on soovitatav enne toitu valmistama asumist
5 minutiks sisse lülitada ja lasta sel töötada toiduvalmistamise ajal ja
umbes 15 minutit pärast seda.
Kubu funktsioonide valimiseks tuleb juhtnuppe lihtsat kergelt puuduta-
da ja neil sõrme hoida.
1. OFF motor
Pressing the button during functioning, the hood turns
OFF.
2. Speed Increase
Pressing the button the hood passes from the OFF
state to speed 1.
Pressing the button (hood in ON state) the motor
speed is increased from speed 1 to intensive.
To each speed corresponds the ignition of the respec-
tive led.
Speed 1: 1
Speed 2: 2
Speed 3: 3
Speed 4: 4 / Intensive mode of work BOOST. Used with
large amount of vapour during cooking. Cooker hood
automatically will switch into third speed, after 5 min.
of work.
3. Function state indicator
4. Speed timing
5. ON/OFF lights
1
2
4
5
3
Speed Timing
Timer: to enable programming automatic switch off at any given time
between 10 and 90 minutes, with 10-minute increments.
To enable programming function, turn the engine on using the “+” but-
ton to the level you want, and then press the button to program the
switch-off time. The display will show a blinking 0, which means, that
the time programming mode was entered.
Select the automatic switch-off time using the “+” button, keeping in
mind, that the number on the display, multiplied by the 10-minut inter-
val, means the time of automatic switch-off (e.g. 1=10 min, 2=20 min,
3=30min, etc.)
With the auto switch-off timer set, confirm the setting using the tim-
er button, the display will stop blinking and will show the previously
selected speed, and the blinking dot next to the speed will show the
switch-off time. You can cancel the automatic switch-off function by
pressing the timer button again while the time is counted down.
Caution: Timer programming should be completed within 20 sesonds,
otherwise no action will be taken, and the hood will resume operation
in normal mode.