gO Measurement-System User Manual
6 / 8
green
TEG
AG
Technoparkstrasse 1
8005 Zürich, Switzerland
T: +41 44 632 04 20
F: +41 44 633 13 68
greenTEG.com
The second page is the Report.
The report tools can be accessed by clicking on “Report” in the menu on the left
-hand side.
On the upper left side of the report page one can select the desired data analysis tool that can be one of the following:
“U
-value
calculator”, “AW (humidity) calculator”
or
“Raw Data export”
.
The design of the U-value calculator is shown in Figure 7. In both tools (U-value and AW calculator) the data gets refreshed
automatically and in real time. To analyze the data, one has to select a time period which contains the desired measurement,
select a base station, a measurement start and the desired node pairing (one inside node and one outside node). By clicking
“Apply” the
measurement data gets processed and a U-value (or AW-value) is calculated. In the U-value calculator it is also
verified if the measurement fulfills the ISO 9869 conditions. If needed, the data can be downloaded
by clicking the “Export to
CSV” butto
n. The AW-value calculator works the same way.
Figure 7: U-value calculator view
The “raw data export” tool
allows the download of all the measurement data of one node.
